While USB 4 may be the latest and fastest generation, the most common USB ports on PCs and peripherals have a “3” in the version number, specifically USB 3.2 or USB 3.1 or even 3.0. When you’re looking at spec sheets, you’ll also also see generation numbers after the USB 3.2 or 3.1 so, for example, there’s USB 3.2 Gen 1, USB 3.2 Gen 2 and even USB 3.2 Gen 2×2. And yet some ports with different version numbers actually have the same speed! Confused yet?
Fortunately, when you get past all the confusing decimals and generation numbers, it’s easy to determine what speeds you can expect from your USB ports, cables and devices. You just need to know the lingo, which we outline below.
| USB Version | Speed | Altenrate Name | Connector Type(s) | Identical to |
|---|---|---|---|---|
| USB 3.2 Gen 1 | 5 Gbps | SuperSpeed USB | Type-A, Type-C, Type-B, Micro | USB 3.1 Gen 1, USB 3.0 |
| USB 3.2 Gen 2 / Gen 2×1 | 10 Gbps | SuperSpeed+ USB 10 Gbps | Type-A, Type-C | USB 3.1 Gen 2 |
| USB 3.2 Gen 2×2 | 20 Gbps | SuperSpeed+ USB 20 Gbps | Type-C | N/A |
| USB 3.1 Gen 1 | 5 Gbps | SuperSpeed USB | Type-A, Type-C, Type-B, Micro | USB 3.2 Gen 1, USB 3.0 |
| USB 3.1 Gen 2 | 10 Gbps | SuperSpeed+ USB 10 Gbps | Type-A, Type-C | USB 3.2 Gen 2 |
| USB 3.0 | 5 Gbps | SuperSpeed USB | Type-A, Type-C, Type-B, Micro | USB 3.1 Gen 1, USB 3.2 Gen 1 |
USB 3.2 vs USB 3.1 and USB 3.0: What’s the Difference?
The version numbers are confusing and don’t mean much as USB 3.0, USB 3.1 Gen 1 and USB 3.2 Gen 1 are all interchangeable and operate at 5 Gbps while USB 3.1 Gen 2 and USB 3.2 Gen 2 are the same, operating at 10 Gbps.
In fact, the USB-IF (USB Implementers Forum), which creates the standards, has told us several times that it would prefer manufacturers not to use these version numbers at all and instead list their products as either SuperSpeed, SuperSpeed 10 Gbps or SuperSpeed 20 Gbps or as just USB 5 Gbps, USB 10 Gbps and USB 20 Gbps.
If you are a vendor and pay for your product to be officially certified by the USB-IF, something many vendors skip, the organization even has a set of logos it would like to see you use.
However, despite the USB-IF’s desires, we still see most PC vendors listing their ports as USB 3.2 or USB 3.1, without necessarily telling you what to expect from them. The spec sheets may not even list a generation number, though if they don’t, you should assume that it’s Gen 1 (5 Gbps).
The different USB 3.x version numbers exist purely because the number has been iterated with each speed advancement. In 2008, the USB 3.0 standard launched, bringing USB up to 5 Gbps, a huge leap from the 480 Mbps speed of USB 2.0, and for many years that was as fast as USB could go. In fact, even today, the vast majority of USB ports and products don’t go beyond 5 Gbps nor do you need them to. Many peripherals don’t even need to go beyond USB 2.0.
In 2013, USB-IF announced that it was taking USB up to 10 Gbps and, in doing so, changed the version number for all USB 3.x products. So USB 3.0 (5 Gbps) became USB 3.1 Gen 1 and the new, 10 Gbps speed became USB 3.1 Gen 2.
In 2017, the organization rolled out a 20 Gbps speed for USB 3.x devices. In honor of the new speed, the version number changed for all speeds so the 5 Gbps speed became USB 3.2 Gen 1 and the 10 Gbps speed became USB 3.2 Gen 2 and the 20 Gbps speed became USB 3.2 Gen 2×2.
The 20 Gbps speed is called USB 3.2 Gen 2×2, because it uses two 10 Gbps lanes to give you the 20 Gbps speed. Would it have been less confusing if they called it USB 3.2 Gen 3? Who knows?
There’s also a lesser-used version called USB 3.2 Gen 1×2, which is 10 Gbps and nearly identical to USB 3.2 Gen 2. The difference is that, while USB 3.2 Gen 2 has a single, 10 Gbps data lane, USB 3.2 Gen 1×2 uses two 5 Gbps lanes to get to its 10 Gbps total. That shouldn’t matter to you as an end user, but you may see the USB 3.2 Gen 1×2 terminology.
What Kind of Connectors Do USB 3.2 and USB 3.1 Use?
Both the 5 Gbps and 10 Gbps speeds are available with either USB Type-A or USB Type-C connectors. USB Type-A ports have the traditional, rectangular connectors that can only be inserted one way. USB Type-C ports are smaller, oval-shaped and reversible. Despite the fact that USB Type-C is extremely common on laptops and phones, many modern desktops don’t ship with even one USB Type-C port.
Though not very common, you’ll also find USB 3.x cables with Type-B connectors, the kind of square connector used mostly to connect to printers and USB hubs.
And there are also some SuperSpeed micro USB connectors. However, these SuperSpeed Type-B and micro USB connectors are larger than regular Type-B and micro connectors so are not backwards compatible.
So, if you’re wondering what kind of wires or adapters you need for a port, the version number alone won’t tell you that. A USB 3.2 Gen 1 or USB 3.2 Gen 2 port or the USB 3.1 equivalents could have either type of connector.
However, if you are using USB 3.2 Gen 2×2 (20 Gbps), you will definitely be using USB Type-C. The Type-A ports cap out at 10 Gbps. Also, though rare, the USB 3.2 Gen 1×2 (also 10 Gbps) can only use Type-C.
What Colors are USB 3.2 / USB 3.1 Ports?
The USB-IF does not mandate that USB ports have to be any particular color. However, a blue port is usually 5 Gbps, which means that it’s SuperSpeed USB (aka USB 3.2 Gen 1, USB 3.1 Gen 1 or USB 3.0). Some manufacturers now use red USB ports to include SuperSpeed 10 Gbps USB (aka USB 3.2 Gen 2 or USB 3.1 Gen 2).
However, it’s also possible that ports will just be black, which doesn’t indicate anything at all. Your best bet for determining speeds is look at the spec sheet for any device, whether it’s a USB hub, an SSD or a motherboard.
What Cables Do You Need for USB 3.2 / USB 3.1?
As with all things USB, USB 3.2 and USB 3.1 are backward compatible with older USB standards. So, if you use a USB 2.0 device or cable and plug it into a USB 3.2 port, you’ll get a connection but at the speed of the slowest link in the chain (in this case 480 Mbps).
If you have a USB 3.2 Gen 2 port and want to take advantage of its 10 Gbps speed, look for a cable that supports 10 Gbps (it could be USB 3.2 Gen 2 or USB 3.1 Gen 2) and a peripheral that does the same. If you want to get 20 Gbps speeds, all three pieces: the port, the peripheral and the cable, must support that speed.
What Can I Do with USB 3.2 or USB 3.1?
USB 3.2 Gen 1 and USB 3.1 Gen 1 run at up to 5 Gbps speeds, which in and of itself, is more than most peripherals require on their own. Wired mice and keyboards, even those with high polling rates, don’t even max out the USB 2.0’s 480 Mbps limit. However, some of the best webcams, require USB 3.2 / 3.1 / 3.0 connectivity, especially when they’re delivering 30 fps at 2K or 4K resolutions.
If you’re using a USB hub, you’ll want at least a 5 Gbps connection, because all of the peripherals connected to that hub will be sharing that bandwidth. So, if you have a mouse, a keyboard and a webcam all plugged into the same hub, they will definitely need at least the 5 Gbps that USB 3.2 Gen 1 / USB 3.1 Gen 1 provides.
Monitors or docking stations that use DisplayLink technology, which allows your computer to output video over a standard USB Type-A port, often require 5 Gbps speeds.
Finally, and perhaps most importantly, external SSDs and hard drives need at least USB 3.2 / 3.1 / 3.0 speeds. The fastest external SSDs or SSD enclosures can operate at USB 3.2 Gen 2 (10 Gbps) or USB 3.2 Gen 2×2 (20 Gbps), though the 10 Gbps speed is far more common and cheaper.
In a quick search of Amazon, we found an M.2 NVMe USB 3.2 Gen 2×2 enclosure for $68 (opens in new tab) and USB 3.2 Gen 2 enclosure for just $28 (opens in new tab).
How Much Power Do USB 3.2 and USB 3.1 Offer?
The USB 3.2 / USB 3.1 / USB 3.0 standards are only specked for 5 Volts and 900ma for a very unimpressive total of 4.5 watts. That’s a hair better than USB 2.0 which caps out at 2.5-watts, but not enough to charge a modern smartphone or tablet very quickly. Also consider that 4.5 watts is the maximum so an individual USB 3.2, Type-A port on a laptop or desktop may not even deliver that much.
| Standard | Port Type | Max Watts | Max Amps | Volts |
|---|---|---|---|---|
| USB 3.2 / 3.1 / 3.0 | USB-A, USB-B | 4.5W | 900mA | 5V |
| USB Power Delivery (PD) | USB-C Only | 240W | 5A | 5V, 9V, 15V, 20V, 28V, 36V, 48V |
| USB Battery Charging (BC) | USB-A, USB-C | 7.5W | 1.5A | 5V |
| USB-C (non PD) | USB-C | 15W | 3A | 5V |
| USB 2.0 | USB-A, USB-B, micro USB | 2.5W | 500mA | 5V |
But it’s important to remember that the charging standards a port supports and the USB version number are not necessarily related. Many chargers and hubs use different charging standards that allow them to go well above the USB 2.0 or USB 3. limits. Those that use USB Battery Charging (USB BC) can deliver up to 7.5 watts over a Type-A port. And then there are third-party standards like Qualcomm Quick Charge that go to 18 watts and beyond.
If you’re using a USB Type-C cable and port, the charger / host device could support USB Power Delivery (USB PD), which can go as high as 240 watts in some cases. But the wattage has nothing to do with data speeds as a USB 2.0 port could have power delivery while a USB 3.2 port might not.
Video Over USB 3.2 / USB 3.1
Technically speaking, neither USB 3.2 nor USB 3.1 by itself can deliver video. Using DisplayLink technology, one can convert and compress video into USB data that goes out to a specially-enabled hub or portable monitor. However, few people today use DisplayLink devices.
Many of the best ultrabooks and best graphics cards have USB Type-C ports that support “alt mode,” which means that the USB cable and port can deliver data using a protocol that’s not part of the USB spec. In many cases, that protocol is DisplayPort 1.2, 1.3 or 1.4, which can then connect your computer to a monitor or TV. However, just because a port supports USB 3.2 or even USB 3.2 Gen 2×2 that does not mean it will necessarily support alt mode.